一聚教程网:一个值得你收藏的教程网站

热门教程

Mybatis结果生成键值对的实例代码

时间:2022-06-25 14:31:41 编辑:袖梨 来源:一聚教程网

在实际应用中我们经常会遇到这样的情况,需要给下拉框赋值,这个时候就需要键值对了,具体使用方法如下

1,在maper.xml文件中定义结果类型(resultType)定义为hashmap,如下所示

 代码如下 复制代码

2,在对应的mapper类中用List>来接受这个类型,如下所示

 代码如下 复制代码
publicList> selectSuperUnitInfo();

其实最强大的莫过于resultMap类型了,这个可以在mapper.xml文件中自定义扩展类型,然后在包中添加这个类型即可,真是强大

下面给大家补充下MyBatis返回Map键值对数据

 代码如下 复制代码

List> getMtypeList();

[DEBUG]2016-08-2917:50:09:==> Executing: select code,`name` from jk_control_measure

[DEBUG]2016-08-2917:50:09:==> Parameters:

[DEBUG]2016-08-2917:50:10:<==  Columns: code, name

[DEBUG]2016-08-2917:50:10:<==    Row: one, 地面冲洗

[DEBUG]2016-08-2917:50:10:<==    Row: two, 边界围挡

[DEBUG]2016-08-2917:50:10:<==    Row: three, 垃圾覆盖

[DEBUG]2016-08-2917:50:10:<==    Row: four, 裸地覆盖

[DEBUG]2016-08-2917:50:10:<==    Row: five, 洒水降尘

[DEBUG]2016-08-2917:50:10:<==    Row: six, 车辆冲洗

[DEBUG]2016-08-2917:50:10:<==    Row: seven, 建筑渣土

[DEBUG]2016-08-2917:50:10:<==    Row: eight, 车辆冒装

[DEBUG]2016-08-2917:50:10:<==    Row: nine, 扬尘覆盖

[DEBUG]2016-08-2917:50:10:<==    Row: ten, 车辆撒漏

[DEBUG]2016-08-2917:50:10:<==    Row: eleven, 车辆黑烟

[DEBUG]2016-08-2917:50:10:<==    Row: twelve, 道路积尘

[{"NAME":"地面冲洗","name":"地面冲洗","code":"one","CODE":"one"},

{"NAME":"边界围挡","name":"边界围挡","code":"two","CODE":"two"},

{"NAME":"垃圾覆盖","name":"垃圾覆盖","code":"three","CODE":"three"},

{"NAME":"裸地覆盖","name":"裸地覆盖","code":"four","CODE":"four"},

{"NAME":"洒水降尘","name":"洒水降尘","code":"five","CODE":"five"},

{"NAME":"车辆冲洗","name":"车辆冲洗","code":"six","CODE":"six"},

{"NAME":"建筑渣土","name":"建筑渣土","code":"seven","CODE":"seven"},

{"NAME":"车辆冒装","name":"车辆冒装","code":"eight","CODE":"eight"},

{"NAME":"扬尘覆盖","name":"扬尘覆盖","code":"nine","CODE":"nine"},

{"NAME":"车辆撒漏","name":"车辆撒漏","code":"ten","CODE":"ten"},

{"NAME":"车辆黑烟","name":"车辆黑烟","code":"eleven","CODE":"eleven"},

{"NAME":"道路积尘","name":"道路积尘","code":"twelve","CODE":"twelve"}

]

返回的结果带有大写与小写的key

热门栏目